Ask tile bathroom properly

Loose tiles and peeling – Who does not know the problem? If the surface is not properly prepared to intensify the pressure between the tiles and grout they break or crack. Almost all materials and surfaces of the house are worn with time – they enlarge or reduce a. Even with the formwork, these changes are felt. Here you will find some useful tips for professional preparation and execution of the tiles in the bathroom, which serves a great help. First, avoid large-scale tiles. The number of joints with small tiles prevent their movement and spread over time, if you're like a large bright bathroom, as indicated below, have smaller tiles and are the right choice of neutral and bright colors. Dark tiles absorb a lot of light and heat and expand in this way much longer. Exposure

sand color is perfect for

Make sure the surface of the tile is free of dust, dirt or mortar adhäsivem. Thus, the tiles provide better grip. Below you can see an intelligent installation. In this case, most importantly, the fact that the joints are not filled with smooth and classic glue or mortar. The surface of the tile can move in this way prevents not without causing the outbreak Driving on bridges often? If yes, then you've probably noticed that the bridges have expansion joints. Yes, exactly – there is this strange rattle under the tires. You hear it especially when it's cold, because concrete shrinks. In summer, when temperatures rise, the material expands again and the joints are filled. Kind of have to think also in the floor. Never forget that the tiles are mobile. To make your flexible tiles, you must certainly coupling membranes. A recommendation are high quality membranes Mat Strata LATICRETE If you hear a hollow sound when you walk on your newly installed tile, unfortunately could mean a potential erosion. The reason is probably a primer made ​​few or too little mortar. With a rubber mallet, gently tap the handle suspicious spot. So you can better assess exactly where the problem lies. The same applies to the base of the tank For steam showers, you must be very careful and use a special cement mortar, adapted very quickly to the high temperature and humidity extremes. The steam showers, which are especially popular in winter are, in principle, be treated separately Glass developed particularly strong. With these large glass panels that let in lots of light and heat, the internal bath temperature increases very rapidly and leads to more pressure intensive material even tiles. Use in such cases, the double membrane impermeable layer with water to the corners of the shower stall Products such as the Noble Seal TS membranes are thicker and have a strong pressure. In larger bathrooms must not forget the expansion joints. If your bathroom counters are more or wider than 4, you should definitely think about and use mortars and special blends tile adhesives that can withstand the expansion and contraction of the tiles without causing worry. With the professional advice you are now better prepared in terms of tiles and determined without ah most unpleasant surprise with your tiles, at least we hope!