Concrete products Pierre Housing

Want to see the results of a great and simple conversion of terrace? The keyword combination therewith means "stone cylinder blocks of concrete." This is one of my favorite DIY projects. Area just in front of my yard was to be converted, but I also wanted to take an approach convenient and not very expensive.

Before After Photos

Curious? First, look at the photos and then I'll explain! OK? Then the same thing! Stone benches concrete
I was sure from the beginning that the bank will be the heart of my project. The question was "only" how do I do this successfully. I went to deposit my home, where I took my 16 cylinder blocks and two pieces of wood. I had only a vague idea of ​​what I wanted. Something to me, however, to move, to obtain additional materials. I was somehow sure I'm going to need it. Concrete stone throne
I first created in the stands of timber. Then I made my decision to build a bank of concrete cylinders. The end result is different from the original idea. But it was not bad and that's why I first shared a few details about them with.'s Materials Back to the top I put two rows with many rolls on the ground. So I turned the ends of the sides. I then six blocks mounted on the surface. Two of them I transversely located, so you can put in plants. Do you recognize this in the back line and the second step? In the pictures above you can see the "throne" of different viewpoints. Gravel is needed I was sure that my bank even more lives had to be reached by plants. So I placed cylinder blocks to the surface. Stones were found to be perfect to fill the gap there. The structure is now as if a block or a kind of line. You can avoid passing through and in other waters in certain situations – this return. Below, we see grass and pots of Japanese flowers of different colors. These plants have a cooling Here you can see the pebbles on the bottom of the cylinder blocks. It consists of basalt, which is composed of an old garden project landscape is left. At the bottom of the cylinder blocks When all is done, I added four blocks of marble. I have everything covered with pebbles, so I added a few plants in the niche on both sides of the shore. Check out the results of my project, which can be considered the seat of the throne or sculpture. Fin, The throne is finished Here you can see the same thing, but viewed from the front. There is another way: instead of the plate may be glued on top of a front view of the plant. Thus, from this concrete structure creates a decorative panel which also serves to support plant. Thus, it makes for a pleasing appearance. Cylinder Block Bank I love the look of the throne seat up. But I also wanted to reflect a structure that will serve as a bench. I was inspired to do so by the ideas of Kayla blog, called The Basement. It is an easy and modular tool tricks and noise viable idea. I borrowed a lot of projects there, but I wanted to implement in small dimensions. My husband and I were given the opportunity to decide independently of me on the final design. Here you can see the devices with which I started., The accessories Accessories – A 2.5-long piece of wood that has been cut in half here. Of course you can decide if needed for longer. – 16 single cylinder blocks – 3 bedroom concrete stone – plants – Pebbles – Earth flowerpots concrete and wood Stages of construction

Give plants Pull a few more fun extras into account. You can add more than two blocks bases. One is with the opening up and the other is transverse. At the top, you can add plants. Complete this purpose the gap with pebbles and a third part is for the plant and soil. Although you can see in the image below difficult, but on both sides, it housed plants. Almost done Do you want to have pillow? This is certainly a wonderful idea. In my case, the little creatures were a little worried. That's why I kept the pillows in a closet in the hall and removed as needed. In most cases, what happened when I enjoy a drink outside. Pillow change the look Want to know one of my secrets? Originally, the Bank looked different, and although their former appearance was immortalized in the image below. This is a good option, but I really wanted a lighter look. But I've changed my mind and came to the design above. Additional Option I'm super happy with the end result. But to me the court always looks a little thin. Project DIY wall art for outdoors … and that's why I'm looking for a DIY project outside wall. I've searched for this and I get the following block: Positively Splendid. There I saw the idea with the foam rolled. I thought they were great, and I decided to install it there. He was on the verge of freshly cut grass, which was filled with metal details. Moss and sheet We had the home-rolled sheet, which is already a big advantage. That's what we issued as a canvas and mounted magnetic pieces. You can replace the images wonderfully, based on these structures. The visible metal on the sides like a modern setting. In this case, we have to do here with a foam layer on a metal surface. Scissors is in use I just measured the foam and cut, then I attached to a piece of metal. I think this time the appearance obtained is clear and very reassuring! Outdoor Dining DIY Wall Finishing Touches We now come to us to look at the final results of the project below. I stuck to the side of the door remotely cabbage in containers. I also spiced it all on a bed of red door. I finished everything by two small flower pots painted who were executed in soft blue. Satisfactory Sometimes the little things that make a big difference. Thank you for sharing the joy of this project with me today. As you can see, there is still room for more color in the room. Personally, I will continue to do today with my DIY Marathon. When I'm done with new ideas about the nature, I will gladly share with you! I hope you also feel like that! Decoration idea